![]() 2GIG Go!Control - $499
The 2GIG Go!Control system comes with a user-friendly color touch-screen control panel capable of wirelessly controlling all components in your system. It can also be configured to control your thermostat, lights, door locks, and other Z-Wave devices you might want to add to your system. What makes the control panel truly sophisticated, however, are its web/smartphone enabled interface, GSM radio communication, and two-way voice features. Click here for a demo of it's user interface ![]() Wireless Door Sensor - $99 (1 point)
This contact can be installed on doors, windows and many other objects that open and close. The sensor transmits signals to the control panel when a magnet mounted near the sensor is moved away from or closer to the sensor. The sensor is also equipped with cover tamper for additional security. ![]() Wireless Motion Detector - $199 (2 points)
This passive infrared motion detector is a wall-mounted unit with wide angle motion protection. The PIR is pet immune up to 55 lbs. ![]() Glass Break Detector - $199 (2 points)
The glass break detector is a fully supervised, tamper-protected, ceiling- or wall-mounted unit with 360 degree maximum horizontal sensing angle, and dual-stage glass break detection. ![]() Wireless Remote Control - $99 (1 point)
This keyfob enables you to turn the system on and off before entering the home or after exiting. If there is an emergency, you can turn on the siren and automatically call the central monitoring station. If lamp modules have been installed, you can use the keyfob to turn all system-controlled lights on or off. The keyfob is a lithium coin battery-powered, wireless keyfob designed to fit on a keychain, in a pocket, or in a purse. ![]() Panic Button Remote - $99 (1 point)
The panic button was designed to transmit an emergency signal from any location within the range of the system. Signals from the button will be transmitted whether the system is armed or disarmed. The button is small and lightweight enough to be placed in a shirt pocket or tucked away inside a purse. it can also be used with the supplied wristband, lanyard, car-visor clip, or belt clip. It can also be permanently mounted to a convenient location. To activate, press and hold the button for approximately 2 seconds. The LED located on the top of the unit will light up for approximately 2 seconds to confirm a signal has been sent. ![]() Smoke Detector - $199 (2 points)
This photoelectric smoke alarm with built-in transmitter designed for use with the 2gig alarm system. When smoke is detected, the alarm sounds a loud local alarm. Twenty seconds after the local alarm sounds, the built-in transmitter sends a digitally coded wireless signal to the Control Panel. The wireless signal will be repeated every 20 seconds as long as smoke is still present. In addition to the photoelectric detector, the unit contains an integrated fixed 135 degree temperature and rate-of-rise heat sensor that will send an alarm signal based on temperature detected. ![]() Carbon Monoxide Detector - $199 (2 points)
Essential for the safety of your home and family, 2GIG’s Wireless Carbon Monoxide Detector provides an early warning of the presence of potentially harmful carbon monoxide gas in your home. Without requiring any new wiring, the sleek and innovative design can easily be installed while maintaining the desired aesthetics of your home decor. Next step, choose a monitoring plan: (click here) |